EVSE SPY J1772 passive diagnostic tool 5’ J1772 cable with upgradeable length

EVSE SPY J1772 passive diagnostic tool 5’ J1772 cable with upgradeable lengthThis is a custom built diagnostic tool to help you see whats really going on between any Electric Vehicle Charging Station (EVSE) and your electric vehicle. The J1772 Spy is passive. Proximity and Pilot signals as well as power ground are passed thru end to end. The displays read off the lines to provide detailed information of the charging session. Very useful for public stations to determine actual services provided. Now built with my new 4 Color

If the charging cable is plugged into the vehicle when power is restored

The Electric Range Buddy Plus #6 is a 2-way switcher based on the original Electric Range Buddy #6

Includes cable holster shown

This Upgrade Pak is not for products with other power cords such as NEMA 10-30

You would also want the Delay Controller if you are using the Buddy with two EVSE's to charge two Electric Vehicles

Note: This is a 30amp cable for 24amp continuous or lower load following the NEC's 80% rule of thumb

New configuration with new Polycarbonate case

16amps is the maximum continuous load for a 20amp outlet

It allows you to share your single L6-30 outlet with two devices

It allows you to share your Range outlet (NEMA 14-50) with your EVSE or any appliance like a Bitcoin miner

This is because at the end of charging our EV's slowly ramp their power draw down

30amp) plug to plug into a common NEMA 14-30 outlet